Material Dealing with Power UNIT 2
General Description
This energy unit attributes electrical power up gravity down circuit. Activate the begin solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve with the decreasing pace managed through the strain compensated movement handle valve. Items of this series might be widely used in the market of logistic units for instance fork lift, mini lift table, and so forth.
Specific Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic components concerned before mounting the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which should also be clean and cost-free of impurities, N46 hydraulic oil is encouraged .
four. Oil altering is needed following the initial a hundred operation hours,afterwards after each and every 3000 hrs.
5. The energy unit really should be mounted horizontally.
Materials Handling Electrical power UNIT 1
Standard Description
This power unit is designed for the fork lift business, consisting of hugely productive gear pump, DC motor, manual raise and reduce valve, tank, ect. The up and down motion are managed by the lever from the guide release valve, that is equipped with an electric switch to activate the motor. The lowing speed is managed by the pressure compensated flow control valve.
Specific Notes
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned before installation of the electrical power unit.
3. Viscosity with the hydraulic oil 
shoud be 15~46 cst, which need to also be clean and totally free of impurities, N46 hydraulic oil is proposed .
four. Oil altering is needed after the preliminary 100 operation hrs, afterwards once every single 3000 hrs.
5. The power unit proven is designed to be mounted horizontally.