Any damage on the teeth surfaces of the sprocket diminishes the life from 
the conveyor chain.
With typical sprockets, substantially worn sprocket teeth have been repaired by teeth padding or the total sprocket was replaced. In either situation, fix was pricey and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent substitute. This sprocket is extremely rated by our clients for that dramatic cost savings in value and time.
Structure
The teeth can be replaced by two approaches: personal tooth replacement or sectional teeth substitute.
The bolts and nuts employed for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated on the proper.
The over photograph as well as top rated proper illustration present a sprocket for individual tooth replacement. Because the joint encounter among the replaced teeth and the sprocket is formed in a distinctive arc, the bonding accuracy is high and also the sprocket strength is enhanced. On top of that, since the load acting about the mounting bolts is decreased, there may be significantly less possibility of loosening. This sprocket construction is patented.
You will find two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilised for significant sprockets obtaining heavy loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags: