Coupling Grease

Why Coupling Grease?
Adequate lubrication is vital for satisfactory gear coupling operation. Gear Coupling Grease is exclusively designed for gear coupling applications to increase coupling daily life though dramatically minimizing maintenance time. Its higher viscosity base oil and tackifier mix to keep the grease in spot and prevent separation and it truly is in finish compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and produced that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces normally located in couplings. Bearing or general objective greases are inclined to separate and drop effectiveness on account of substantial centrifugal forces on the different components at large rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from your thickeners. Heavy thickeners, which have no lubrication characteristics, accumulate within the gear tooth mesh region leading to premature coupling failure. Gear Coupling Grease is built to hugely resistant to centrifugal separation from the oil and thickener, which enables the lubricant to be used for a rather prolonged time period of time.
One of several secrets on the success of Gear Coupling Grease is the variable consistency throughout the working cycle on the application. The consistency of our gear coupling grease changes with all the operating circumstances. Working in the lubricant below actual services problems causes the grease to turn out to be semi-fluid, functionally solash lubricating the dress in surfaces with the coupling. As the grease cools, it returns on the unique consistency, thereby avoiding leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and five lb. cans.
Functions
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
High load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in area under large speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated which has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.